T-One connectors allow for a quick connection without needing to splice, cut or tape your vehicle’s wiring. The installation is quick, easy and no tools are necessary! This connector fits the following vehicles and models: 2006 - 2010 Hyundai Azera (all models) and 2001 - 2007 Toyota Highlander (all except hybrid).
4-Flat Mounting bracket part number: CQT118144
5-way addition part number: 13496
6-way addition part number: 13320
7-way addition part number: 47185
Connector location: inside cargo area
6-way bracket part number: 13303
Reviews (1)
Mark
Rating:
Installed myself in 30 minutes. Instructions were fairly easy to understand, but found that a Youtube video was better (Just search for your model/year with similar wiring kit) Literally plug and play. Plus, the price of this kit was 1/2 what I found locally - and it arrived in 2 days after ordering (Edmonton AB Canada!)
Questions & Answers (6)
Questions & Answers
(6)
Do I need the power fuse lead and where do I pull the power wire to connect the fuse power cord I connected to battery and brought it back to the electrical converter box area but just unsure if I cut the brown wire and connect or it's another wire I have a 2006 Highlander..
When I bought my hitch it added the power fuse wire to battery.
Hopkins OEM Grade Power Wire with Fuse Holder
I already hooked everything up my trailer lights all works but uhaul added this fuse thing to my cart like I needed it so the CQT118413 4-Flat with Factory Style Taillight Harness Converter is hooked up without the fuse wire and all works fine but I'm unsure what wire to cut into to put the fuse wire from battery please help.
Hey Chris! Please call your local U-Haul Center or give us a call at 866-277-6855 and we can help.
Which trailer light adapter is needed for a 2004 Jeep Liberty
Hello, Chris! For a 2004 Jeep Liberty, please use the vehicle-specific taillight harness CQT118524. Thank you!
I have a 2007 Highlander and my wire harness is bad I need a new one cuz how much is it to install it
Hi, Jacob! Please contact your local U-Haul Hitch Center to learn more about installation pricing. Thank you!
Will this work through the vehicle wiring harness without need for lead to battery?? I’m assuming that this product will convet brake and taillights to 2 wires on my 07 Highlander?
Hey, Mark! This taillight wiring harness converts your 3-wire taillight system to a 2-wire system without a lead from the battery. I hope that is helpful!
We have a 2006 Toyota Highlander and had a U-Haul hitch and wiring installed in 2007. It has worked well until recently, when the right side lighting quite. Upon inspection, the trailer light power module has a small melted area on the side where the right side wiring is. I imagine this is the problem. The original power module and wiring are the generic version, with clip-ons to the appropriate vehicle wires (brakes, taillights, blinkers). It would look like this quick connect would be a great replacement for the original. However, the wiring in our Highlander has only one large plug rather than the four plugs shown in the picture of the U-Haul quick connector (two large and two small). Is the picture accurate, or will this quick connect work with just one large plug?
Hey, Don! There are two types of 4-flat plug-and-play style trailer wiring harnesses that will fit your vehicle:
CQT118413, which is a T-connector that uses the taillight connectors.
CQT118248, which is a single plug harness that plugs into the vehicle tow harness located in the cargo area.
I hope that is helpful!
Do I have to buy a T-connector in addition to this?
CQT118413 includes the connector assembly, converter and 4-flat plug, no additional T-connectors are needed.
T-One connectors allow for a quick connection without needing to splice, cut or tape your vehicle’s wiring. The installation is quick, easy and no tools are necessary! This connector fits the following vehicles and models: 2006 - 2010 Hyundai Azera (all models) and 2001 - 2007 Toyota Highlander (all except hybrid).
4-Flat Mounting bracket part number: CQT118144
5-way addition part number: 13496
6-way addition part number: 13320
7-way addition part number: 47185
Connector location: inside cargo area
6-way bracket part number: 13303
CQT118413 4-Flat with Factory Style Taillight Harness Converter Reviews (1)
Mark
Rating:
Installed myself in 30 minutes. Instructions were fairly easy to understand, but found that a Youtube video was better (Just search for your model/year with similar wiring kit) Literally plug and play. Plus, the price of this kit was 1/2 what I found locally - and it arrived in 2 days after ordering (Edmonton AB Canada!)
Questions & Answers
(6)
Do I need the power fuse lead and where do I pull the power wire to connect the fuse power cord I connected to battery and brought it back to the electrical converter box area but just unsure if I cut the brown wire and connect or it's another wire I have a 2006 Highlander..
When I bought my hitch it added the power fuse wire to battery.
Hopkins OEM Grade Power Wire with Fuse Holder
I already hooked everything up my trailer lights all works but uhaul added this fuse thing to my cart like I needed it so the CQT118413 4-Flat with Factory Style Taillight Harness Converter is hooked up without the fuse wire and all works fine but I'm unsure what wire to cut into to put the fuse wire from battery please help.
Hey Chris! Please call your local U-Haul Center or give us a call at 866-277-6855 and we can help.
Which trailer light adapter is needed for a 2004 Jeep Liberty
Hello, Chris! For a 2004 Jeep Liberty, please use the vehicle-specific taillight harness CQT118524. Thank you!
I have a 2007 Highlander and my wire harness is bad I need a new one cuz how much is it to install it
Hi, Jacob! Please contact your local U-Haul Hitch Center to learn more about installation pricing. Thank you!
Will this work through the vehicle wiring harness without need for lead to battery?? I’m assuming that this product will convet brake and taillights to 2 wires on my 07 Highlander?
Hey, Mark! This taillight wiring harness converts your 3-wire taillight system to a 2-wire system without a lead from the battery. I hope that is helpful!
We have a 2006 Toyota Highlander and had a U-Haul hitch and wiring installed in 2007. It has worked well until recently, when the right side lighting quite. Upon inspection, the trailer light power module has a small melted area on the side where the right side wiring is. I imagine this is the problem. The original power module and wiring are the generic version, with clip-ons to the appropriate vehicle wires (brakes, taillights, blinkers). It would look like this quick connect would be a great replacement for the original. However, the wiring in our Highlander has only one large plug rather than the four plugs shown in the picture of the U-Haul quick connector (two large and two small). Is the picture accurate, or will this quick connect work with just one large plug?
Hey, Don! There are two types of 4-flat plug-and-play style trailer wiring harnesses that will fit your vehicle:
CQT118413, which is a T-connector that uses the taillight connectors.
CQT118248, which is a single plug harness that plugs into the vehicle tow harness located in the cargo area.
I hope that is helpful!
Do I have to buy a T-connector in addition to this?
CQT118413 includes the connector assembly, converter and 4-flat plug, no additional T-connectors are needed.
Free standard shipping is available on qualifying orders $100 (USD) or more when shipped within the contiguous U.S. or on orders $150 (CAD) or more when shipped within Canada.
Same-Day Delivery:
Our network of friendly neighborhood delivery drivers will pickup qualifying products from your local U-Haul Store and deliver them to your door.* This service is available in most areas on our most popular products. Choose Same-Day delivery while shopping to check availability in your area.
*Delivery fee will be calculated at checkout.
Free standard shipping is available on qualifying orders $100 (USD) or more when shipped within the contiguous U.S. or on orders $150 (CAD) or more when shipped within Canada.
In-Store Pickup Savings! When you pick up your order instead of shipping it to your home, you may see additional savings as some products will be priced lower for in-store pickup.
Same-Day Delivery:
Our network of friendly neighborhood delivery drivers will pickup qualifying products from your local U-Haul Store and deliver them to your door.* This service is available in most areas on our most popular products. Choose Same-Day delivery while shopping to check availability in your area.
Free Shipping on orders over $100
Pick Up In-Store for lower prices on select items
Do I need the power fuse lead and where do I pull the power wire to connect the fuse power cord I connected to battery and brought it back to the electrical converter box area but just unsure if I cut the brown wire and connect or it's another wire I have a 2006 Highlander.. When I bought my hitch it added the power fuse wire to battery. Hopkins OEM Grade Power Wire with Fuse Holder I already hooked everything up my trailer lights all works but uhaul added this fuse thing to my cart like I needed it so the CQT118413 4-Flat with Factory Style Taillight Harness Converter is hooked up without the fuse wire and all works fine but I'm unsure what wire to cut into to put the fuse wire from battery please help.
Hey Chris! Please call your local U-Haul Center or give us a call at 866-277-6855 and we can help.
Which trailer light adapter is needed for a 2004 Jeep Liberty
Hello, Chris! For a 2004 Jeep Liberty, please use the vehicle-specific taillight harness CQT118524. Thank you!
I have a 2007 Highlander and my wire harness is bad I need a new one cuz how much is it to install it
Hi, Jacob! Please contact your local U-Haul Hitch Center to learn more about installation pricing. Thank you!
Will this work through the vehicle wiring harness without need for lead to battery?? I’m assuming that this product will convet brake and taillights to 2 wires on my 07 Highlander?
Hey, Mark! This taillight wiring harness converts your 3-wire taillight system to a 2-wire system without a lead from the battery. I hope that is helpful!
We have a 2006 Toyota Highlander and had a U-Haul hitch and wiring installed in 2007. It has worked well until recently, when the right side lighting quite. Upon inspection, the trailer light power module has a small melted area on the side where the right side wiring is. I imagine this is the problem. The original power module and wiring are the generic version, with clip-ons to the appropriate vehicle wires (brakes, taillights, blinkers). It would look like this quick connect would be a great replacement for the original. However, the wiring in our Highlander has only one large plug rather than the four plugs shown in the picture of the U-Haul quick connector (two large and two small). Is the picture accurate, or will this quick connect work with just one large plug?
Hey, Don! There are two types of 4-flat plug-and-play style trailer wiring harnesses that will fit your vehicle:
- CQT118413, which is a T-connector that uses the taillight connectors.
- CQT118248, which is a single plug harness that plugs into the vehicle tow harness located in the cargo area.
I hope that is helpful!Do I have to buy a T-connector in addition to this?
CQT118413 includes the connector assembly, converter and 4-flat plug, no additional T-connectors are needed.