Home/
Trailers & Towing / How to Install a Trailer Hitch on a Kia EV6 (2022)
  • Facebook icon.
  • LinkedIn icon.
  • X/Twitter icon.
  • Print icon.
  • Link icon.

How to Install a Trailer Hitch on a Kia EV6 (2022)

by | Aug 18, 2022

Adding a trailer hitch to a Kia EV6 requires only a few tools, a Draw-Tite 76420 trailer hitch, and minimal time to complete the installation. This trailer hitch installation process will work for the 2022 model year Kia EV6.

Follow these simple steps to start towing trailers and other types of trailer hitch-mounted accessories for your Kia EV6 today.

Tools needed:

  • Safety glasses
  • Torque wrench
  • Flathead screwdriver
  • Pneumatic saw
  • 10mm and 14mm sockets

Kia EV6 (2022) Trailer Hitch Installation Steps

1. Remove the bumper cover

Before installation, we will need to prepare the vehicle’s undercarriage for the trailer hitch. We will begin by removing the vehicle’s trim panel. To remove this trim panel, you will need to detach its six plastic clips, three 10 mm bolts, and one 14 mm plastic nut.

2. Cut off the lower bumper fairing

Once the trim panel is removed, we will need to cut it according to the manufacturer’s specifications. Once measured, this trim can be completed using a pneumatic saw.

3. Disconnect the wiring harness

On the vehicle chassis drive side, the electrical harness will need to be disconnected during the installation of the trailer hitch.

4. Rear fairing trim

Additional trim will be needed on the rear trim panel.

5. Lift the trailer hitch into position 

Once the underside of the vehicle is properly prepared, the trailer hitch can now be lifted and put in place.

6. Install the equipment

Install the supplied hardware at the appropriate access points on the trailer hitch and vehicle chassis. The six 19 mm M12 bolts and conical washers must be installed.

6. Tighten and secure the trailer hitch 

Once the supplied hardware has been correctly installed, we will need to tighten and secure it according to the manufacturer’s specifications. 

7. Reinstall the removed edge panel

Once the trailer hitch installation is complete, don’t forget to reinstall the removed curb panel with its accessories. 

You should now have installed your tow hitch on your Kia EV6.

Bike rack mounted on the tow hitch of a Kia EV6

How much does it cost to add a tow hitch to a Kia EV6 (2022)?

The price range for a trailer hitch for a Kia EV6 varies from $220 to $235 . U-Haul offers several different categories of trailer hitches and various sizes to fit both 1-1/4″ and 2″ receivers. U-Haul offers both installation services at local U-Haul Service Stores and will ship your trailer hitch to your home.

How much does a tow hitch cost for a Kia EV6 (2022)?

Installation fees are typically between $100  and $200 , but you should check with your local U-Haul Moving Center®. Prices may vary depending on location, the model of trailer hitch you install, and your vehicle. All U-Haul Moving Centers® can install a trailer hitch on your vehicle. With over 1,500 U-Haul stores nationwide, you can get your trailer hitch installed and back on the road in no time. 

All trailer hitches sold and installed at a U-Haul Moving Center® come with an optional lifetime warranty guaranteeing replacement of your trailer hitch without limitation for any damage, including collisions, corrosion, accidental overloading, spin-outs, and vehicle theft.

How long does it take to install a trailer hitch on a Kia EV6 (2022)?

Installation takes between 1 and 2.5 hours, depending on the trailer hitch being installed and your vehicle. We recommend scheduling an appointment online through our website to accommodate your busy schedule. Additionally, U-Haul service centers offer a wide range of towing accessories ( trailer hitch ball mounts , trailer hitch balls, cotter pins, and wiring) to help you safely  tow your boat, motorhome, or trailer .

Luggage rack mounted on the tow hitch of a Kia EV6

Do you need a wiring kit for a Kia EV6 (2022)?

If you plan to tow a trailer or motorhome with brake lights, running lights, and turn signals, you’ll need a wiring kit to power your trailer lights. The most common lighting harnesses come in 4-pin and 7-pin connectors. The 4-way connector has basic lighting functions (running lights, brake lights, turn signals), while the 7-way connector adds a 12-volt circuit, a circuit for the trailer’s electric brakes, and backup lights. U-Haul offers both 4-way and 7-way connectors . Find out which option is best for your Kia EV6.

For more than 80 years, orange has been an iconic and recognizable color in moving and storage, signifying U-Haul products and services and the quality, affordability, and convenience they provide.

  • Facebook icon.
  • LinkedIn icon.
  • X/Twitter icon.
  • Print icon.

More For You

Back
To Top