How to Install a Trailer Hitch on a Ford Maverick
Adding a trailer hitch to a Ford Maverick requires only a few tools, a CURT 13504 trailer hitch, and a short amount of time to complete the installation. This trailer hitch and installation process will work for the Ford Maverick year 2022.
Follow these basic steps to begin hauling trailers and other kinds of hitch-mounted accessories for your Ford Maverick today.
Tools Needed:
- Safety Glasses
- Flathead Screwdriver
- Exhaust Pliers
- Air Saw
- Fish Wire
- Soapy Water
- Socket Wrench
- Torque Wrench
- Impact Wrench
- 19mm, 18mm, 7mm, and 11/16 Sockets
Ford Maverick Hitch Installation Steps
1. Lower Exhaust
To begin the hitch installation process, we will need to prep the vehicle’s underbody for the addition of the hitch. To start we will need to lower the exhaust, which is held by three exhaust hangers. For this vehicle, it is only necessary to remove the rear-most hanger to lower the exhaust enough for the hitch’s installation.
2. Remove Underbody Panel
Our next step will be to remove the rear underbody panel found on the passenger side. This panel features eight bolts and a plastic push clip. These bolts can be removed with a 7mm socket.
3. Remove Factory Bolts
With the rear underbody panel removed, the two factory bolts which need to be removed will be now visible. Each of these bolts can be removed with an 18mm socket.
4. Trim Fascia and Underbody Panel
Trims to the bumper fascia and underbody panel will be needed to make room for the hitch’s presence on the vehicle. The exact dimensions needed for each trim can be found in the complete instructions.
5. Install Provided Hardware
Now that the vehicle’s underbody has been prepped, we can install the provided hardware for the hitch installation. The hardware should be installed to the frame by using fish wire.
6. Raise Hitch into Position
After installing the hardware we can now raise the hitch into its proper position. The hitch should be placed adjacent to the appropriate attachment points and through the previously made trim of the bumper fascia. Once the hitch is in place, be sure to install the remaining hardware.
7. Tighten and Torque
We now need to tighten and torque the hitch to the manufacturer’s specifications. For the forward-most bolts, an 11\16-inc socket can be used. The rear-most bolts can be tightened with a 19mm socket.
8. Re-install Removed Parts
Now that the hitch is installed, we can re-install the parts which were removed. The rear passenger side underbody panel can be re-installed. Next, the exhaust can be re-installed by attaching the hanger to the built-in bracket found on the hitch.
You should now have your trailer hitch installed on your Ford Maverick.
How Much Does It Cost to Add a Hitch for a Ford Maverick?
The price range of a hitch for a Toyota RAV4 ranges from $250 to $275. U-Haul carries several different classes of hitches and offers different sizes to accommodate both 1¼ to 2-inch receivers. U-Haul offers both installation services at a local U-Haul Moving Center® and will ship your hitch to your home.
How Much Does a Hitch for a Ford Maverick Cost?
Installation costs are normally $100 to $200 but you should check with your local U-Haul Moving Center® as prices can differ based on location, the hitch model you are installing, and your vehicle. All U-Haul Moving Centers can install a hitch to your vehicle and with over 1,500 U-Haul centers throughout the country, you can have your hitch installed and be back on the road in no time.
All trailer hitches sold and installed at a U-Haul Moving Center® come with the option of a lifetime warranty plan guaranteed to replace your hitch with no limitation for any damage, including collision, corrosion, accidental overload, jackknifing, and vehicle theft.
How Long Does It Take to Install a Hitch on a Ford Maverick?
Installation takes anywhere from 1 to 2 ½ hours depending on the hitch being installed and your vehicle. We recommend making an online appointment from our website to accommodate your busy schedule. In addition, U-Haul service centers offer an extensive line of towing accessories (Ball mount, Hitch ball, Pin, and Clip, Wiring) to help you safely tow your boat, camper, or trailer.
Do You Need a Wiring Kit for a Ford Maverick?
If you are planning to tow a trailer or camper with brake lights, running lights, and turn signal, you will want a wiring kit to power the lights on your trailer. The most common lighting harness comes in a 4 pin and 7 pin connector. The 4- way connector has basic lighting functions (running lights, brake lights, turn signal) while the 7-way connector adds a 12-volt circuit, circuit for electric trailer brakes, and reverse lights. U-Haul offers both 4-way and 7-way connectors. Find out which option is best for your Ford Maverick.