How to Install a Trailer Hitch on a Honda Accord
Adding a trailer hitch to a Honda Accord requires only a few tools, a Curt 11525 trailer hitch, and a short amount of time to complete the installation. This trailer hitch and installation process will work for the Honda Accord model years 2018-2021.
Follow these basic steps to begin hauling trailers and other kinds of hitch-mounted accessories for your Honda Accord today.
Tools needed:
- Safety Glasses
- Power Drill with ½” Drill Bit
- Torque Wrench
- Measuring Tape
- Spray Bottle (Water and Soap)
- Step Bit
- 1.25” Hole Saw
Honda Accord Hitch Installation Steps
1. Lower Exhaust
Our first step in the hitch installation process will be to lower the exhaust, which we will do by removing five rubber hangars. There are two located on the driver’s side, two located on the passenger side, and another located in the middle of the vehicle’s frame. Before we remove these hangers to lower the exhaust, we will be securing it with a support strap to ensure it doesn’t completely fall.
2. Remove Muffler
With the exhaust lowered, we are now going to remove the muffler located on the driver’s side of the vehicle. Its two bolts can be removed with a 14mm socket.
3. Trim Heat Shield
Now that we have the muffler removed, we have better access to the heat shield which we will need to remove a bolt from and then trim. The bolt which needs to be removed is located nearest the vehicle’s exterior and can be done with a 10mm socket.
With the bolt removed, we are going to measure five inches from the edge of the heat shield and mark where our trim needs to occur. Using our hole saw we will be making an access point that will align with the hole in the frame for installing the hitch. Repeat this process on each side of the vehicle.
4. Raise Hitch Into Position
With the underbody of the vehicle prepped, we can now raise our hitch into position for it to be installed on the vehicle. As we raise the hitch into position, we will mark where it aligns on the frame so we can create additional access points with our power drill and step bit.
5. Install Provided Hardware
Following the hitch being raised into place, we can now install our provided hardware. Two bolts will need to be installed on each side. The shorter bolt will need to be installed on the heat shield, and the longer bolt will be installed on the access point of the frame.
6. Tighten and Torque Hitch
With our bolts installed and our hitch in place, we can now remove the fish wire and attach our flange nuts. Following this, we will tighten and torque the hitch according to the manufacturer’s specifications - properly securing it to the vehicle’s frame.
7. Re-Install Muffler and Exhaust
To wrap up our hitch installation process, we will be re-install the muffler and exhaust we removed in our earlier steps.
You should now have your trailer hitch installed on your Honda Accord.
How much does it cost to add a hitch for a Honda Accord?
The price range of a hitch for a Honda Accord ranges from $170 to $180. U-Haul carries several different classes of hitches and offers different sizes to accommodate both 1¼ to 2-inch receivers. U-Haul offers both installation services at a local U-Haul Moving Center® and will ship your hitch to your home.
How much does it cost to have a hitch installed on a Honda Accord?
Installation costs are normally under $100 but you should check with your local U-Haul Moving Center® as prices can differ based on location, the hitch model you are installing, and your vehicle. All U-Haul Moving Centers can install a hitch to your vehicle and with over 1,500 U-Haul centers throughout the country, you can have your hitch installed and be back on the road in no time.
All trailer hitches sold and installed at a U-Haul Moving Center® come with the option of a lifetime warranty plan guaranteed to replace your hitch with no limitation for any damage, including collision, corrosion, accidental overload, jackknifing, and vehicle theft.
How long does it take to install a hitch on a Honda Accord?
Installation takes anywhere from 1 to 2 ½ hours depending on the hitch being installed and your vehicle. We recommend making an online appointment from our website to accommodate your busy schedule. In addition, U-Haul service centers offer an extensive line of towing accessories (Ball mount, Hitch ball, Pin, and Clip, Wiring) to help you safely tow your boat, camper, or trailer.
Do you need a wiring kit for Honda Accord?
If you are planning to tow a trailer or camper with brake lights, running lights, and turn signal, you will want a wiring kit to power the lights on your trailer. The most common lighting harness comes in a 4 pin and 7 pin connector. The 4- way connector has basic lighting functions (running lights, brake lights, turn signal) while the 7-way connector adds a 12-volt circuit, circuit for electric trailer brakes, and reverse lights. U-Haul offers both 4-way and 7-way connectors. Find out which option is best for your Honda Accord.