How to Install a Trailer Hitch on a Hyundai Kona (2020-2023)
Adding a trailer hitch to a Hyundai Kona requires only a few tools, a Draw-Tite 76599 trailer hitch, and a short amount of time to complete the installation. This trailer hitch and installation process will work for Hyundai Kona model years 2020-2023.
Follow these basic steps to begin hauling trailers and other kinds of hitch-mounted accessories for your Hyundai Kona today.
Tools Needed:
- Safety Glasses
- Flathead Screwdriver
- Torque Wrench with 11/16 Socket
- Rachet with 10mm Socket
Hyundai Kona (2020-2023) Hitch Installation Steps
1. Remove Underbody Panel
To begin the hitch installation process, we will be removing the underbody dust panel located on the passenger side of the vehicle. This panel features three push pins and a bolt. The push pins can be removed with a flathead screwdriver and the bolt with a 10mm socket.
2. Raise Hitch into Position
With this underbody panel removed, we can begin raising the hitch into position. The hitch should align with the two existing attachment points on the frame for each side of the vehicle.
3. Install Provided Hardware
Our next step after getting the hitch into place will be to install the provided hardware to the appropriate attachment points. When installing these bolts we will be using the fish wire method to get the hardware through the access holes. Following this, we will need to install the washer and nut to each bolt - securing it to the hitch.
4. Tighten and torque hitch
With the hitch in place and the hardware installed, we will now tighten and torque the hitch according to the manufacturer’s specifications.
You should now have your trailer hitch installed on your Hyundai Kona.
How Much Does It Cost to Add a Hitch for a Hyundai Kona?
The price range of a hitch for a Hyundai Kona ranges from $195 to $215. U-Haul carries several different classes of hitches and offers different sizes to accommodate both 1¼ to 2-inch receivers. U-Haul offers both installation services at a local U-Haul Moving Center® and will ship your hitch to your home.
How Much Does a Hitch for a Hyundai Kona Cost?
Installation costs are normally $100 to $200 but you should check with your local U-Haul Moving Center® as prices can differ based on location, the hitch model you are installing, and your vehicle. All U-Haul Moving Centers can install a hitch to your vehicle and with over 1,500 U-Haul centers throughout the country, you can have your hitch installed and be back on the road in no time.
All trailer hitches sold and installed at a U-Haul Moving Center® come with the option of a lifetime warranty plan guaranteed to replace your hitch with no limitation for any damage, including collision, corrosion, accidental overload, jackknifing, and vehicle theft.
How Long Does It Take to Install a Hitch on a Hyundai Kona?
Installation takes anywhere from 1 to 2 ½ hours depending on the hitch being installed and your vehicle. We recommend making an online appointment from our website to accommodate your busy schedule. In addition, U-Haul service centers offer an extensive line of towing accessories (Ball mount, Hitch ball, Pin, and Clip, Wiring) to help you safely tow your boat, camper, or trailer.
Do You Need a Wiring Kit for a Hyundai Kona?
If you are planning to tow a trailer or camper with brake lights, running lights, and turn signal, you will want a wiring kit to power the lights on your trailer. The most common lighting harness comes in a 4 pin and 7 pin connector. The 4- way connector has basic lighting functions (running lights, brake lights, turn signal) while the 7-way connector adds a 12-volt circuit, circuit for electric trailer brakes, and reverse lights. U-Haul offers both 4-way and 7-way connectors. Find out which option is best for your Hyundai Kona.