How to Install a Trailer Hitch on a Hyundai Palisade (2020-2022)
Adding a trailer hitch to a Hyundai Palisade requires only a few tools, a Draw-Tite 76420 trailer hitch, and a short amount of time to complete the installation. This trailer hitch and installation process will work for Hyundai Palisade model years 2020-2022.
Follow these basic steps to begin hauling trailers and other kinds of hitch-mounted accessories for your Hyundai Palisade today.
Tools needed:
- Safety Glasses
- Power Drill
- Exhaust Strap
- Exhaust Removal Pliers
- 14, 16, & 19mm sockets
- 5” Socket Extension
- Flathead Screw Driver
- 19mm Box Wrench
- Air Saw
- Pry Bar
- Torque Wrench
Hyundai Palisade (2020-2022) hitch installation steps
1. Lower spare tire and exhaust
Prior to installation, we will need to prep the vehicle’s underbody for the hitch. We will start by lowering the spare tire to be removed. Next, we are going to lower the exhaust by detaching it from its 3 exhaust hangers. To support your exhaust, attach a strap from the vehicle’s frame to the exhaust.
2. Remove driver-side underbody panel
Remove the underbody panel found on the driver’s side of the vehicle. To do this you will need a flathead to remove the push pins and a 14mm socket to remove the plastic bolts.
3. Trim bumper fascia
A small 5.5-inch by ½-inch cut of the bumper is required to allow for the hitch to fit properly in place. This can be done by using an air saw.
4. Raise hitch into place
After the previous adjustments to the vehicle’s underbody, the hitch can now be raised into position.
5. Install the hardware
Install the provided hardware to the proper access points of the vehicle’s frame. The larger long bolt will be installed on the passenger side, while the remaining two bolts will need to be installed on the driver’s side.
6. Tighten and torque the hitch
After the provided hardware has been properly installed, we will need to tighten and torque according to the manufacturer’s specifications.
7. Re-install spare tire and raise exhaust
With the hitch installation complete, don’t forget to re-install the removed spare tire and raise the exhaust back into its proper position.
You should now have your trailer hitch installed on your Hyundai Palisade.
How much does it cost to add a hitch for a Hyundai Palisade (2020-2022)?
The price range of a hitch for a Hyundai Palisade ranges from $200 to $225. U-Haul carries several different classes of hitches and offers different sizes to accommodate both 1¼ to 2-inch receivers. U-Haul offers both installation services at local U-Haul service centers and will ship your hitch to your home.
How much does it cost to have a hitch installed on a Hyundai Palisade (2020-2022)?
Installation costs are normally under $100 but you should check with your local U-Haul Moving Center® as prices can differ based on location, the hitch model you are installing, and your vehicle. All U-Haul Moving Centers can install a hitch to your vehicle and with over 1,500 U-Haul centers throughout the country, you can have your hitch installed and be back on the road in no time.
All trailer hitches sold and installed at a U-Haul Moving Center® come with the option of a lifetime warranty plan guaranteed to replace your hitch with no limitation for any damage, including collision, corrosion, accidental overload, jackknifing, and vehicle theft.
How long does it take to install a hitch on a Hyundai Palisade (2020-2022)?
Installation takes anywhere from 1 to 2 ½ hours depending on the hitch being installed and your vehicle. We recommend making an online appointment from our website to accommodate your busy schedule. In addition, U-Haul service centers offer an extensive line of towing accessories (Ball mount, Hitch ball, Pin, and Clip, Wiring) to help you safely tow your boat, camper, or trailer.
Do you need a wiring kit for Hyundai Palisade (2020-2022)?
If you are planning to tow a trailer or camper with brake lights, running lights, and turn signal, you will want a wiring kit to power the lights on your trailer. The most common lighting harness comes in a 4 pin and 7 pin connector. The 4- way connector has basic lighting functions (running lights, brake lights, turn signal) while the 7-way connector adds a 12-volt circuit, circuit for electric trailer brakes, and reverse lights. U-Haul offers both 4-way and 7-way connectors. Find out which option is best for your Hyundai Palisade.