How to Install a Trailer Hitch on a Mazda CX-9 (2020-2022)
Adding a trailer hitch to a Mazda CX-9 requires only a few tools, a Curt 13284 trailer hitch, and a short amount of time to complete the installation. This trailer hitch and installation process will work for Mazda CX-9 model years 2020-2022.
Follow these basic steps to begin hauling trailers and other kinds of hitch-mounted accessories for your Mazda CX-9 today.
Tools Needed:
- Safety Glasses
- Flathead Screwdriver
- Torque Wrench
- Impact Wrench
- Fish Wire
- Exhaust Removal Pliers
- Exhaust Straps
- 17mm, 14mm, and 10mm Sockets
Mazda CX-9 Hitch Installation Steps
1. Remove Underbody Panel
To begin the hitch installation process, we will need to prep the vehicle’s underbody for the addition of the hitch. To start we will need to remove the lower underbody fascia. This panel is held in by four push pins which can be detached with a flathead screwdriver. After this panel is removed, there is a bracket behind it on each side of the vehicle that needs to be removed as well.
2. Lower Exhaust
Our next step will be to lower the exhaust to allow room for the hitch to fit into place. The exhaust is held in by four rubber hangers which will need to be detached. Before we do this, we will need to use straps to prevent the exhaust from falling.
3. Install Provided Hardware
We will now be installing our provided hardware to the proper attachment points. To install these bolts we will be using the fish wire technique to feed the hardware through each access hole.
4. Raise Hitch into Position
With our hardware in place, we can now raise the hitch into position. We will line up the hitch to the attachment points and feed the fish wire through each corresponding hole, pulling the bolts to the hitch. After this, we can remove the fish wire and install our washer and nut to each bolt.
5. Tighten and Torque
With the hitch in place, we will tighten and torque it according to the manufacturer’s specifications.
6. Re-Install Exhaust
Now that the hitch is installed, we can re-install the exhaust which was removed. For this, we can simply re-attach each exhaust hanger and remove the supporting straps.
You should now have your trailer hitch installed on your Mazda CX-9.
How Much Does It Cost to Add a Hitch for a Mazda CX-9?
The price range of a hitch for a Mazda CX-9 ranges from $155 to $220. U-Haul carries several different classes of hitches and offers different sizes to accommodate both 1¼ to 2-inch receivers. U-Haul offers both installation services at a local U-Haul Moving Center® and will ship your hitch to your home.
How Much Does a Hitch for a Mazda CX-9 Cost?
Installation costs are normally $100 to $200 but you should check with your local U-Haul Moving Center® as prices can differ based on location, the hitch model you are installing, and your vehicle. All U-Haul Moving Centers can install a hitch to your vehicle and with over 1,500 U-Haul centers throughout the country, you can have your hitch installed and be back on the road in no time.
All trailer hitches sold and installed at a U-Haul Moving Center® come with the option of a lifetime warranty plan guaranteed to replace your hitch with no limitation for any damage, including collision, corrosion, accidental overload, jackknifing, and vehicle theft.
How Long Does It Take to Install a Hitch on a Mazda CX-9?
Installation takes anywhere from 1 to 2 ½ hours depending on the hitch being installed and your vehicle. We recommend making an online appointment from our website to accommodate your busy schedule. In addition, U-Haul service centers offer an extensive line of towing accessories (Ball mount, Hitch ball, Pin, and Clip, Wiring) to help you safely tow your boat, camper, or trailer.
Do You Need a Wiring Kit for a Mazda CX-9?
If you are planning to tow a trailer or camper with brake lights, running lights, and turn signal, you will want a wiring kit to power the lights on your trailer. The most common lighting harness comes in a 4 pin and 7 pin connector. The 4- way connector has basic lighting functions (running lights, brake lights, turn signal) while the 7-way connector adds a 12-volt circuit, circuit for electric trailer brakes, and reverse lights. U-Haul offers both 4-way and 7-way connectors. Find out which option is best for your Mazda CX-9.