How to Install a Trailer Hitch on a Chevrolet Silverado (2014-2019)
Adding a trailer hitch to a Chevrolet Silverado requires only a few tools, a Curt 13175 trailer hitch, and a short amount of time to complete the installation. This trailer hitch and installation process will work for Chevrolet Silverado model years (2014-2019).
Follow these basic steps to begin hauling trailers and other kinds of hitch-mounted accessories with your Chevrolet Silverado today.
Tools Needed:
- Safety Glasses
- Power Drill
- Torque Wrench
- 13-16 Wrench
- Pry Bar
- 5” Extension
- 21mm, 3/4 Sockets
Chevrolet Silverado (2014-2019) Hitch Installation Steps
1. Remove Existing Bolts
If removal of a spare tire is not necessary, begin the process by removing existing bumper bracket bolts and nuts from each frame rail.
2. Raise Hitch Into Place
Raise the hitch into proper position aligning the rear most holes in the hitch with the holes where the bumper bracket bolts were removed. Secure hitch using factory bolts in existing weld nuts.
3. Install Hardware
Install ½” carriage bolts, spacers, and flange nuts in the remaining holes. Be sure to tighten then torque all hardware according to the manufacturer's specifications.
You should now have your trailer hitch installed on your Chevrolet Silverado.
Whatever vehicle you drive, we have a trailer hitch that will fit your needs. Don't have enough time to do the installation yourself? Schedule a professional trailer hitch installation and we'll do the work.
For more information visit uhaul.com, and be sure to check out more tips on trailer hitches.
More Articles About Trailer Hitches: