How to Install a Trailer Hitch on a Kia EV6 (2022)
Adding a trailer hitch to a Kia EV6 requires only a few tools, a Draw-Tite 76420 trailer hitch, and a short amount of time to complete the installation. This trailer hitch and installation process will work for Kia EV6 model year 2022.
Follow these basic steps to begin hauling trailers and other kinds of hitch-mounted accessories for your Kia EV6 today.
Tools needed:
- Safety Glasses
- Torque Wrench
- Flathead Screwdriver
- Air Saw
- 10mm & 14mm Sockets
Kia EV6 (2022) hitch installation steps
1. Remove the bumper fascia
Prior to installation, we will need to prep the vehicle’s underbody for the hitch. We will start by removing the vehicle’s fascia panel. To remove this fascia panel you will need to detach its six plastic push pins, three 10mm bolts, and one 14mm plastic nut.
2. Trim lower bumper fascia
After the fascia panel is removed, we will need to trim it according to the manufacturer’s specifications. Once measured, this trim can be completed using an air saw.
3. Disconnect harness
On the drive’s side of the vehicle frame, the electric harness will need to be disconnected while the hitch is being installed.
4. Trim rear fascia
Another trim will be needed on the rear fascia panel.
5. Raise hitch into position
With the underbody of the vehicle properly prepped, the hitch can now be raised into place.
6. Install the hardware
Install the provided hardware to the proper access points of the hitch and the vehicle’s frame. All six M12 19mm bolts and conical washers will need to be installed.
6. Tighten and torque the hitch
After the provided hardware has been properly installed, we will need to tighten and torque according to the manufacturer’s specifications.
7. Re-install the removed fascia panel
With the hitch installation complete, don’t forget to re-install the removed fascia panel with its attachments.
You should now have your trailer hitch installed on your Kia EV6.
How much does it cost to add a hitch for a Kia EV6 (2022)?
The price range of a hitch for a Kia EV6 ranges from $220 to $235. U-Haul carries several different classes of hitches and offers different sizes to accommodate both 1¼ to 2-inch receivers. U-Haul offers both installation services at local U-Haul service centers and will ship your hitch to your home.
How much does it cost to have a hitch installed on a Kia EV6 (2022)?
Installation costs are normally under $100 but you should check with your local U-Haul Moving Center® as prices can differ based on location, the hitch model you are installing, and your vehicle. All U-Haul Moving Centers can install a hitch to your vehicle and with over 1,500 U-Haul centers throughout the country, you can have your hitch installed and be back on the road in no time.
All trailer hitches sold and installed at a U-Haul Moving Center® come with the option of a lifetime warranty plan guaranteed to replace your hitch with no limitation for any damage, including collision, corrosion, accidental overload, jackknifing, and vehicle theft.
How long does it take to install a hitch on a Kia EV6 (2022)?
Installation takes anywhere from 1 to 2 ½ hours depending on the hitch being installed and your vehicle. We recommend making an online appointment from our website to accommodate your busy schedule. In addition, U-Haul service centers offer an extensive line of towing accessories (Ball mount, Hitch ball, Pin, and Clip, Wiring) to help you safely tow your boat, camper, or trailer.
Do you need a wiring kit for Kia EV6 (2022)?
If you are planning to tow a trailer or camper with brake lights, running lights, and turn signal, you will want a wiring kit to power the lights on your trailer. The most common lighting harness comes in a 4 pin and 7 pin connector. The 4- way connector has basic lighting functions (running lights, brake lights, turn signal) while the 7-way connector adds a 12-volt circuit, circuit for electric trailer brakes, and reverse lights. U-Haul offers both 4-way and 7-way connectors. Find out which option is best for your Kia EV6.